BEST PRICE IN THE STATES!
|BUY YOURS TODAY!!
|Engine Air cooled, 2-cylinder,
normally aspirated Kawasaki engine
Starter 12-volt (1.2 kw), solenoid shift
Charging System 12-volt.
Oil Filter Remote mounted, spin-on engine oil filter (oil
pan and filter can be drained into a single
drain container for easy maintenance
and minimal cleanup)
oil capacity. 2 qts Engine Oil SAE30.
Fuel Unleaded 87 octane.
Fuel Filter Heavy-duty fuel filter.
Cooling Direct-driven, mechanical cooling fan.
Governor Mechanical governor with 3600 RPM high
TRACTION DRIVE SYSTEM
Type Dual hydrostatic drive includes
tandem Large industrial pumps,
Parker Wheel Motors
and an auxiliary oil cooler w/electric fan.
Pumps are driven directly from crankshaft
with micro V-belt.
Hydraulic Oil 15W50 Mobil 1. Filter 30 micron, in tank.
Ground Speed infinitely variable 0-14 mph
Steering Twin-lever SmoothTrak™ steering provides
independent control of each drive wheel. Speed,
forward,reverse, brake, and turns are all controlled
with hand-operated controls.
Turning Radius True zero degree. Turns
within its own length. Counter-rotating,
independent drive wheels.
Brakes Service: Hydrostatic dynamic
braking. Parking: Internal friction brake
in each PRM wheel motor. When steering levers are
placed in neutral position, integral park brakes are
Mower Drive Single V-belt drive from engine with
Warner electric CMS 250
enhanced spot brake clutch. Spring tension
idler for extended belt life.
Tires Front: 13 x 6.50 – 6, pneumatic
Drive: 24 x 12.00 – 12, turf tread
Capacities Fuel System 12 US gal.
Hydraulic Oil: 7 US qts (6.6 L) Engine
Dimensions Height 54 in w/ROPS folded down, 69 in
ROPS up W/60 in VX4 Deck Length 84.5 in Overall
width 66 in w/discharge chute
Tire-to-tire width 57 in
Weight 1515 lbs
Safety Features Standard foldable ROPS. Operator
presence system connected to seat, deck clutch, and
park brake switches. Stabilizer rollers at rear of tractor.
Seat Molded-vinyl, suspension seat with armrests. Fore
and aft adjustment.
Construction Mainframe is 1.5 in x 3 in x .187 in (3.8
cm x 7.62 cm x .47 cm) rectangular steel tubing. Drive
motors mounted to .179 in (.45 cm) welded
steel. Front caster wheels mounted with
roller bearings on each wheel. Front
caster forks are .5 in (1.27 cm) steel.
Deck Lift Foot-operated deck height
adjustment. Pin for setting height, detent for transport
Controls Hand-operated throttle, ignition switch,
electric mower clutch.
Integrated parking brakes.
Indicators Hour meter, light for low oil pressure, Gas
Cup Holder Two cup holders molded into the left side
fuel tank. Accommodates nearly any cup size.
• Clean, compact design. Much more compact than
• Engine mounted sideways for serviceability and
• High-torque engine for the most demanding